Reinforcing bars

Reinforcing non-pre-stressed steel S500 class for concrete structures

Range:
Ø 4,0; 5,0; 6,0; 8,0; 10,0; 12,0
Steel grade:
chemical composition acc. to STB1704-2012
Standard:
STB 1704-2012

Reinforcing wire round profile according to STB 1341-2009

Wire diameter, mm Tolerances on diameter, mm

Linear density, g/m
no more

Breaking load, kN
no less
The force corresponding proof strength, kN,
not less
Elongation, δ100,%,
no less
Number of bends, at least
3,0 +0,03
-0,08
55 3,89 3,53 2,0 4
4,0 +0,04
-0,11
99 6,91 6,28 2,5 4
5,0 +0,05
-0,13
154 10,80 9,82 3,0 5

Reinforcing wire (two-sided) profile in accordance with GOST 6727-80

Wire diameter, mm Tolerances on diameter, mm

Linear density, g/m
no more

Breaking load, kN
no less
The force corresponding proof strength, kN,
not less
Elongation, δ100,%,
no less
Number of bends, at least
4,0 +0,04
-0,12
92 7,1 6,2 2,5 4
5,0 +0,05
-0,15
144 10,6 9,7 3,0 4

Reinforcing wire (triangular) profile in accordance with the requirements STB1704-2006, DIN 488, as well as a similar reinforcement wire in accordance with the requirements of TU 14-1-5510-2005 GOST R 52544-2006 (Russia), PN-ISO 6935- 2 (Poland), NS 3576-1, NS EN 10080 (Norway), ONORM V4200 / 7 (Austria), general admission construction supervision № Z-1.2-219..

Wire diameter, mm Relative shear area of transverse ribs Linear density, g/m
The requirements of STB 1704-2006, DIN 488
5,0 0,039 154
6,0 0,039 222
8,0 0,045 395
10,0 0,052 617
12,0 0,056 888

Reinforcing wire (triangular) profile.

Nominal diameter, mm Yield strength Re, H / mm2 The ratio of the ultimate tensile strength to the proof strength Rm / Re  
  СТБ 1704-2006, DIN 488 ONORM B4200 STB 1704-2006 DIN 488 ONORM B4200
4,0 500 - 1,03 - -
5,0 500 - 1,03 1,05 |
6,0 500 550 1,05 1,05 1,10
8,0 500 550 1,05 1,05 1,10
10,0 500 550 1,05 1,05 1,10
12,0 500 550 1,05 1,05 1,10

reinforcing wire of the round profile having diameters 3,0-5,0 mm is supplied in coils of 1000 kg, diameters 3,0; 4,0 mm may also be supplied in coils having mass 1400 kg.

Overall  dimensions  of  a  coil  having  mass  1000  kg: height – 460 mm, internal diameter – 500/420 mm, external diameter – 850/820 mm.
Overall  dimensions  of  a  coil  having  mass  1400  kg: height – 650 mm, internal diameter – 5 00 mm, external diameter – 850 mm.

The reinforcing wire of the periodical profile is supplied in coils having mass from 1000 kg to 3000 kg.

Mass of a coil is determined according to the customer's demand.

Specifications of wire coilsи

Weight of coil, kg Inner diameter, mm External diameter, mm Height, mm
1000 420 820 460
1400 600 870 750
2500 600 1080 750
3000 600 1120 750

Coils are tied with the steel metal strip in at least four places.

Your manager: